EN 14647-2005 铝酸钙水泥.成分、规范和一致性标准

作者:标准资料网时间:2024-05-16 06:36:16 浏览:9274 来源:标准资料网

【英文标准名称】:Calciumaluminatecement-Composition,specificationsandconformitycriteria;EnglishversionofDINEN14647:2005
【原文标准名称】:铝酸钙水泥.成分、规范和一致性标准
【标准号】:EN14647-2005
【标准状态】:现行
【国别】:
【发布日期】:2006-01
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:矾土;建筑石灰;CE标志;水泥;合格证明书;认证(认可);化学成分;化学性质;组件;组分;合格;合格试验;建筑;施工材料;定义;名称与符号;耐久性;主要成份;作标记;质量浓度;机械性能;机械试验;物理性能;生产控制;特性;范围;规范(验收);材料强度;符号;试验
【英文主题词】:Alumina;Buildinglime;CEmark;CEmarking;Cements;Certificatesofconformity;Certification(approval);Chemicalcomposition;Chemicalproperties;Components;Composition;Conformity;Conformitytesting;Construction;Constructionmaterials;Definition;Definitions;Designations;Durability;Mainconstituents;Marking;Massconcentration;Mechanicalproperties;Mechanicaltesting;Physicalproperties;Productioncontrol;Properties;Scope;Specification;Specification(approval);Strengthofmaterials;Symbols;Testing
【摘要】:
【中国标准分类号】:Q11
【国际标准分类号】:91_100_10
【页数】:35P.;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: EN 12101-10-2005 烟和热控制系统.第10部分:电力供应
下一篇: EN 480-2-2006 混凝土、灰浆和压紧灰浆混合剂.试验方法.第2部分:凝固时间测定

【英文标准名称】:Dentalrotaryinstruments-Diamondinstruments-Dimensions,requirements,markingandpackaging
【原文标准名称】:牙科用旋转器械.金刚石器械的尺寸,要求,标识和包装
【标准号】:BSENISO7711-1-1998+A1-2009
【标准状态】:现行
【国别】:英国
【发布日期】:1998-11-15
【实施或试行日期】:1998-11-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:牙科设备;牙科器械;牙科旋切器;牙科学;金刚石刀具;金刚石镶嵌;金刚石刀具;尺寸;处理;惰性气体铠装电弧焊;作标记;云母板;包装件;产品信息;质量控制;旋转;形状;规范(验收)
【英文主题词】:Coarse-grained;Dentalequipment;Dentalinstruments;Dentalrotary-cuttinginstruments;Dentistry;Diamondcutters;Diamondimpregnation;Diamondtools;Dimensions;Marking;Packages;Productinformation;Qualitycontrol;Rotating;Shape;Specification(approval)
【摘要】:
【中国标准分类号】:C33
【国际标准分类号】:11_060_25
【页数】:60P;A4
【正文语种】:英语

Product Code:SAE J1711
Title:Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles
Issuing Committee:Hybrid - Ev Committee
Scope:This SAE Recommended Practice establishes uniform chassis dynamometer test procedures for hybrid-electric vehicles (HEVs) that are designed to be driven on public roads. The procedure provides instructions for measuring and calculating the exhaust emissions and fuel economy of HEV's driven on the Urban Dynamometer Driving Schedule (UDDS) and the Highway Fuel Economy Driving Schedule (HFEDS), as well as the exhaust emissions of HEVs driven on the US06 Driving Schedule (US06) and the SC03 Driving Schedule (SC03). However, the procedures are structured so that other driving schedules may be substituted, provided that the corresponding preparatory procedures, test lengths, and weighting factors are modified accordingly. Furthermore, this document does not specify which emissions constituents to measure (e.g., HC, CO, NOx, CO2); instead, that decision will depend on the objectives of the tester. For purposes of this test procedure, an HEV is defined as a road vehicle that can draw propulsion energy from both of the following sources of stored energy: 1) a consumable fuel and 2) a rechargeable energy storage system (RESS) that is recharged by an electric motor-generator system, an off-vehicle electric energy source, or both. Consumable fuels that are covered by this document are limited to petroleum-based liquid fuels (e.g., gasoline and Diesel fuel), alcohol-based liquid fuels (e.g., methanol and ethanol), and hydrocarbon-based gaseous fuels (e.g., compressed natural gas). RESS脮s that are covered by this document include batteries, capacitors, and electromechanical flywheels. Single-roll, electric dynamometer test procedures are specified to minimize the test-to-test variations inherent in track testing and to conform with standard industry practice for exhaust emissions and fuel economy measurements. Also, this document does not include test procedures for "recharge-dependent" operating modes (see 3.1.12 for definition).